RENT
or PURCHASE
Engineered for Lowest Containment Cost
Low-cost,
heavy-duty EconoTanks offer versatile liquid storage for environmental,
industrial, commercial and agricultural applications. Designed
for short-term use – typically up to 18 months – the
4'-9" high EconoTank is available at per-gallon containment
costs below those of other storage systems. Additional cost savings
can be realized through ModuTank Inc.’s rental arrangement
(see Rentals). As a result, EconoTanks
are the economical alternative to standard tanks, lagoons, Frac
tanks, ponds or pits.
Lowest
in Overall Cost
Modular
EconoTanks, designed for rapid bolt-together assembly by unskilled
crews sharply reduce installation costs. Furthermore, hand-carried
components engineered for ground level assembly with common hand
tools eliminate cranes, scaffolding, welding and special equipment.
Free-standing EconoTanks can be installed on any firm level surface
with little or no site preparation. Expensive concrete footings
are not necessary. Additionally, shipping charges are minimized
through efficient, compact packaging of modular components on
standard skids. For example, the steel for a 2,000,000 gallon
Econotank can ship on a single flatbed.
General
Specification
Wall
panels are 16 gauge G90 galvanized steel. Support frames are 2"
x 2" x 1/8" and 2" x 2" x 3/16" steel
angle, hot dip galvanized after fabrication. Tension cables are
steel. A 20 mil. polyethylene reinforced liner is standard. Other
liners are available.
Rental
Plan
See
Rentals.
Size
Ranges
Any
desired rectangular size from 8' x 8' upward based on 3'-9"
long modules and 4'-9" wall height. From hundreds to millions
of gallons.
EconoTank
Covers
Floating
covers fabricated from the same flexible membrane material as
liners are available as an option for creating totally enclosed
systems. Covers, buoyed up by flotation logs, ride the fluid’s
surface and create a practically vapor-tight enclosure.
Leak
Detection
Double
liner leak detection systems are available.
Piping
Inlet
and outlet pipes can be over-the-top, through-the-wall or at the
bottom. Bottom drains, sumps and flange fittings are available.
|
