RENT
or PURCHASE
Engineered for Lowest Containment Cost
Low-cost,
heavy-duty EconoTanks offer versatile liquid storage for
environmental, industrial, commercial and agricultural
use, including potable water storage, chemical storage,
and numerous other liquid storage applications. Designed
for short-term use typically up to 18 months
the 4'-9" high EconoTank is available at per-gallon
containment costs below those of other storage systems.
Additional cost savings can be realized through ModuTank
Inc.s rental arrangement (see Rentals).
As a result, EconoTanks are the economical alternative
to standard tanks, lagoons, Frac tanks, ponds or pits.
Lowest
in Overall Cost
Modular
EconoTanks, designed for rapid bolt-together assembly
by unskilled crews sharply reduce installation costs.
Furthermore, hand-carried components engineered for ground
level assembly with common hand tools eliminate cranes,
scaffolding, welding and special equipment. Free-standing
EconoTanks can be installed on any firm level surface
with little or no site preparation. Expensive concrete
footings are not necessary. Additionally, shipping charges
are minimized through efficient, compact packaging of
modular components on standard skids. For example, the
steel for a 2,000,000 gallon Econotank can ship on a single
flatbed.
General
Specification
Wall
panels are 16 gauge G90 galvanized steel. Support frames
are 2" x 2" x 1/8" and 2" x 2"
x 3/16" steel angle, hot dip galvanized after fabrication.
Tension cables are steel. A 20 mil. polyethylene reinforced
liner is standard. Other liners are available.
Rental
Plan
See
Rentals.
Size
Ranges
Any
desired rectangular size from 8' x 8' upward based on
3'-9" long modules and 4'-9" wall height. From
hundreds to millions of gallons.
EconoTank
Covers
Floating
covers fabricated from the same flexible membrane material
as liners are available as an option for creating totally
enclosed systems. Covers, buoyed up by flotation logs,
ride the fluids surface and create a practically
vapor-tight enclosure.
Leak
Detection
Double
liner leak detection systems are available.
Piping
Inlet
and outlet pipes can be over-the-top, through-the-wall
or at the bottom. Bottom drains, sumps and flange fittings
are available.
|