Lowest In Overall Cost
Per-gallon containment cost for any ModuTank or EconoTank size is below those of any other storage system.

Installation Speed
A typical 68' x 68' x 6'-0" high tank (200,000 gallons) can be completely installed on a prepared site by six unskilled laborers and a supervisor in about eight hours, using common hand tools. An easily followed step-by-step installation manual has been used successfully by hundreds of contractors to install ModuTanks. All modular components are designed to be hand carried by one or two workers.

Seismic 4 Design
A ModuTank design engineered to meet Universal Building Code Seismic 4 requirements is available. Contact ModuTank Inc. for specifics.

ModuTank Covers
Floating covers fabricated from the same flexible membrane material as liners are available as an option for creating totally enclosed systems. Covers, buoyed up by flotation logs, ride the fluid’s surface and create a practically vapor-tight enclosure. A wide variety of fittings and vents is available.

Liners
Premium quality flexible membrane liners compatible with most liquid solutions handled by industry and for environmental applications are available. They include: XR-5, polyethylene, polypropylene, and PVC.

Leak Detection
Double liner leak detection systems are available.

Piping
Inlet and outlet pipes can be over-the-top, through-the-wall or at the bottom. Bottom drains, sumps and flange fittings are available.

Modutank Specifications
Wall panels are 16 gauge G90 galvanized steel. Support frames are 2" x 3" x 1/4" and 2" x 2" x 1/8" and 2" x 2" x 3/16" steel angles hot-dip galvanized after fabrication. Battens are 2" x 10 gauge galvanized steel. A choice of factory fabricated as well as field assembled liners and floating covers in various gauges and materials is available.

Size Ranges
Any desired rectilinear size from 8' x 8' upward based on 3'-9" long modules and 6'-0" wall height from hundreds to millions of gallons