|
Heavy
Duty Storage to Unlimited Sizes
ModuTanks
are low-cost, versatile, heavy-duty square or rectangular storage
tanks for environmental, industrial, commercial, agricultural
and aquaculture applications. ModuTanks are economical alternatives
to costly standard tanks, ponds or pits. Built for heavy-duty
service to 2,000,000 gallons, the modular facility is ideal for
permanent or standby storage.
Lowest
In Overall Cost
Per-gallon
containment cost for any ModuTank or EconoTank size is below those
of any other storage system.
Installation
Speed
A typical 75' x 75' x 5'-0" high tank (200,000 gallons) can
be completely installed on a prepared site by six unskilled laborers
and a supervisor in about eight hours, using common hand tools.
An easily followed step-by-step installation manual has been used
successfully by hundreds of contractors to install ModuTanks.
All modular components are designed to be hand carried by one
or two workers.
Seismic 4 Design
A
special ModuTank design engineered to meet Universal Building
Code Seismic 4 requirements is available. Its unique structural
design has been certified by a registered professional engineer.
Contact ModuTank Inc. for specifics.
ModuTank
Covers
Floating
covers fabricated from the same flexible membrane material as
liners are available as an option for creating totally enclosed
systems. Covers, buoyed up by flotation logs, ride the fluid’s
surface and create a practically vapor-tight enclosure. A wide
variety of fittings and vents is available.
Liners
Premium
quality flexible membrane liners compatible with most liquid solutions
handled by industry and for enviromental applications are available.
They include: XR-5, polyethylene, polyproplyene, and PVC.
Leak
Detection
Double
liner leak detection systems are available.
Piping
Inlet
and outlet pipes can be over-the-top, through-the-wall or at the
bottom. Bottom drains, sumps and flange fittings are available.
Modutank
Specifications
Wall
panels are 16 gauge G90 galvanized steel. Support frames are 2"
x 2" x 1/8" and 2" x 2" x 3/16" steel
angle. Top rails are 3" x 2" steel angle hot-dip galvanized
after fabrication. Plated steel fasteners and stainless steel
tension cable system are supplied. A choice of fitted liners and
floating covers in various gauges and materials is available.
Size
Ranges
Any
desired rectilinerar size from 8' x 8' upward based on 3'-9"
long modules and 5'-0" wall height from hundreds to millions
of gallons
|
